Safety Advice While Using Pneumatic Tools

Pneumatic tools which are power driven by compressed air will be useful and portable alternative to electrical tools on construction sites, industrial and at any working area where power tools are used. Nail guns, staple guns, drills, riveting guns, paint sprayers, sanders, grinders, wrenches, buffers, and jack hammers are among the most popular pneumatic tools used on the job, but really the list of previous air-powered hand tools is endless. We recommend that you take the following safety precautions when using pneumatic tools



1. Always read the manual

Before operating your pneumatic tool and compressor , make certain to read the coordinating manufacturer instruction manual . they're going to provide tool specific information on the handling, usage, warnings and maintenance procedures to follow for the very best level of safety.

2. Wear proper PPE

Since pneumatic tools can be noisy, it's necessary to wear protective equipment while using them or working in an environment where they're commonly used. When operating with pneumatic tools, high-impact eye protection such as safety glasses or goggles is required, but full head and face protection can be used for extra protection. Moreover, it is recommended that the company provide their workers with free safety toe shoes or work boots, hard hats, gloves, dust masks, and hearing protection.

3. Know your trigger

Improving your pneumatic tool safety program starts with understanding the varied sorts of trigger mechanisms and therefore the contact safety tip. The way a trigger functions depends on the order during which controls are activated and whether the trigger discharges multiple nails or single nails when activated. Various trigger types can include:
  • Full Sequential Trigger
  • Contact Trigger
  • Single Sequential Trigger
  • Single Actuation Trigger

4. Follow the manufacturer guidelines or instructions for atmospheric pressure 

Maintain safe atmospheric pressure ranges for tools, valves, and fittings. When cleaning surfaces keep atmospheric pressure below 30 psi and never “dead-end” compressed gas against yourself or anyone else.

5. Use the relief air coupler mostly on the tool

A relief type of the air coupler is that the only way your tool should be connected to an air supply. It’s a fast connect with a pull-down sleeve that permits compressed gas within the tool to be relieved when disconnected. It reduces the danger of accidental discharge after the tool has been disconnected.

6. Only use recommended compressor 


Know the capabilities of the compressor you propose to use together with your tool. Check the CFM rating and pounds per sq in (psi) to form sure they're compatible together with your pneumatic tool’s manufacturer recommendation.

7. Never carry the tool with the hose

Pneumatic tools should not be carry or hold pneumatic tools by the hose or connections. this might put undue pressure and stress onto these components, which may cause early failure of the hose and/or injury. Store your hoses safely, away from heat and sunlight.

8. Never modify your tool

Never disable or bypass pneumatic tool safety features. Any quite tampering to the tool, trigger or other components will greatly increase the probabilities of injury or unintentional firing of the tool.

9. No horseplay

Many injuries occur due to horseplay. Never point a tool at yourself or others or use the tool during a way it had been not designed for. Otherwise, the results might be dangerous, if not deadly.

10. Disconnect from the air supply If not in use

When the pneumatic tool isn't in use, always disconnect it from the air supply. This prevents accidental discharge from occurring when you're taking a break, eating lunch, or finishing the day's work.





Comments

Popular posts from this blog

Covid-19 Trigger for Lockdown Once More?

Oil Pulse Tools & Their Features